ماژول التراسونیک SRF05
ماژول ماژول التراسونیک SRF05
ساخت چین
SRF05 یک فاصله سنج التراسونیک بوده و با استفاده از این ماژول قادر خواهید بود فاصله دقیق یک مانع را مشخص نمایید. این ماژول به نوعی مدل تکامل یافته SRF04 است. در این ماژول انعطاف طراحی بالا رفته و برد مفید فاصله سنجی ارتقاء یافته است. SRF05 با SRF04 کاملا تطابق داشته و برد آن از 3 متر به 4 متر افزایش یافته است. برای صرفه جویی در پایه های I/O ی میکروکنترلر یا هر سیستم میزبان دیگر امکان جدیدی در SRF05 تعریف شده است. در این حالت میتوانید از طریق یک پایه پالس تریگر را ارسال و سیگنال اکو را دریافت کنید.
ویژگی ها ولتاژ کاری: 5VDC جریان مصرفی استاتیک: <2mA
زاویه سنسور: <15 درجه
سیگنال خروجی: سیگنال فرکانس الکتریکی high level 5V, low level 0V
مسافت قابل سنجش: 2cm تا 450cm
دقت : 2mm
سیگنال تریگر ورودی: 10us TTL
ایمپالس سیگنال اکو: خروجی سیگنال TTL PWL
Description
The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is fully compatible with the SRF04. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05 to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05 operates with separate trigger and echo pins, like the SRF04. The SRF05 includes a small delay before the echo pulse to give slower controllers such as the Basic Stamp and Picaxe time to execute their pulse in commands. Mode 1 – SRF04 compatible – Separate Trigger and Echo This mode uses separate trigger and echo pins, and is the simplest mode to use. All code examples for the SRF04 will work for the SRF05 in this mode. To use this mode, just leave the mode pin unconnected – the SRF05 has an internal pull up resistor on this pin.
Visits: 1113
هنوز بررسیای ثبت نشده است.