ماژول لمسی خازنی TTP223
ماژول مینی سنسور خازنی تاچ پد لمسی TTP223 یک ماژول و برد کامل است که از سنسور لمسی TTP 223 در آن استفاده شده است . این ماژول جایگزین بسیار مناسبی برای کلید های فیزیکی و قدیمی دو حالته و یا چند حالته می باشد. از ویژگی های کلی این ماژول می توان به بازه ولتاژی ورودی 2.5 تا 5.5 ولت به صورت DC و اشاره کرد . این برد دارای ۳ پایه جداگانه می باشد که دوتا از پایه ها به عنوان VCC و GND در نظر گرفته شده اند و پایه سوم نیز پایه سیگنال این ماژول می باشد.
آی سی TTP223 ، تشخیص دهنده ی تاچ پد است که میتواند برای 1 کلید تاچ را برای ما ایجاد کند. مصرف بسیار کم انرژی ، بازه ی ولتاژی گسترده از ویژگی های این کلید برای کاربردهای DC و یا AC است ماژول سنسور خازنی تاچ ( لمسی ) TTP223 ، از پشت شیشه و سطوح نازک نیز قابلیت تشخیص دارد. تراشه ی اصلی این سنسور TTP223 است.
مشخصات فنی کلید لمسی (تاچ) خازنی مدل TTP223
مد های کاری : toggle یا سوئیچ
تغذیه : 2.5V-5.5V
مد تریگر : 1:Short – 0:Long
جریان کاری : 13uA Max
حساسیت قابل تنظیم پدها
جریان : 1.5uA – حداکثر : 3.0uA
زمان پاسخ گویی: حداکثر 220 میلی ثانیه
حالت توان پایین در تغذیه ی 3 ولت
GENERAL DESCRIPTION The TTP223-BA6/TTP223N-BA6 TonTouchTM is a touch pad detector IC which offers 1 touch key. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. Low power consumption and wide operating voltage are the contact key features for DC or AC application. FEATURES – Operating voltage 2.0V~5.5V – Operating current VDD=3V, no load – At low power mode typical 1.5uA, maximum 3.0uA – The response time max 220mS at low power mode VDD=3V – Sensitivity can adjust by the capacitance(0~50pF) outside – Stable touching detection of human body for replacing traditional direct switch key – Provides Low Power mode – Provides direct mode,toggle mode by pad option(TOG pin) Q pin is CMOS output – All output modes can be selected active high or active low by pad option(AHLB pin) – After power-on have about 0.5sec stable-time, during the time do not touch the key pad, And the function is disabled – Auto calibration for life At low power mode the re-calibration period is about 4.0sec normally, When key detected touch and released touch, the auto re-calibration will be redoing after about 16sec from releasing key – The sensitivity of TTP223N-BA6 is better than TTP223-BA6’s. But the stability of TTP223N-BA6 is worse than TTP223-BA6’s. APPLICATION – Wide consumer products – Button key replacement
Visits: 1934
dr.hosainy (خریدار محصول) –
ماژول خیلی خوبی هست. با این قیمت خیلی مناسبه.